DVDO Edge - Silicon Optix HQV - Deinterlacing and Upscaling Tests - Race Car 1

Pictured on this page is one of the tests that shows how good the video processor of the DVDO Edge Video Scaler is at detecting 3:2 source material. In other words, the video processor has to be able to dectect whether the source material is film based (24 frames per second) or video based (30 frames a second) and display the source material correctly on the screen, so as to avoid artifacts.

In the case of the race car and grandstand shown in this photo, if the video processor in the DVDO Edge is poor the grandstand would display a moire pattern on the seats. However, if the upscaling of the DVDO Edge Video Scaler has very good video processing, the Moire Pattern will not be visible or only visible during the first five frames of the cut.

As shown in this photo, the moire pattern is not visible as the image pans and the race car goes by. This indicates very good performance of the DVDO Edge Video Scaler with regards to accurate processing of film or video-based content containing detailed backgrounds and fast moving foreground objects.

For another sample of how this image should look, check out an example of this same test as performed by the OPPO DV-983H Upscaling DVD Player used for comparison. NOTE: The OPPO DV-983 employs an Anchor Bay ABT1018 video processing chip, whereas the DVDO Edge uses a more sophisticated Anchor Bay ABT2010 video processing chip.

For a sample of how this test should not look, check out an exmaple of this same deinterlacing/upscaling test as performed by the Pioneer Elite BDP-95FD Blu-ray Disc Player, from a past product review.

Proceed to the next photo...