Moving right are two sets of Component Video (red, green, blue) inputs, followed by a set of component video outputs.
Just to the right of the component video connections are the AM/FM radio antenna connections (Indoor AM and FM antennas are provided).
Moving down to the section is a row of Composite (yellow) video inputs and outputs.
Moving down to the final section is a row of analog stereo inputs and outputs, a set of Zone 2 preamp outputs, and dual subwoofer preamp outputs.
It must be noted that there are not 5.1/7.1 analog audio inputs or outputs and there is also no provision for direct connection of a Turntable for playing Vinyl Records. You cannot use the analog audio inputs to connect a turntable due to the fact that the impedance and output voltage of the turntable cartridge is different than for other types of audio components.
If you desire to connect a turntable to the STR-DN1030, you can either employ an additional Phono Preamp or buy a one of the breed of turntables have built-in phono preamps that will work with the audio connections provided on the STR-DN1030.
For a look at the speaker connections provided on the Sony STR-DN1030, proceed to the next photo....